How to Program a 2000 Chevy Blazer Remote
- 1). Enter your Blazer with your keyless remote, insert your key into the ignition and close all of the doors.
- 2). Press and hold the "Unlock" tab on the driver's-side door. Be prepared to hold the tab through the following step.
- 3). Cycle the ignition "On" and then "Off" twice in a row.
- 4). Release the "Unlock" tab and wait for the vehicle to respond by cycling the door locks.
- 5). Hold both the "Lock" and "Unlock" buttons on the remote for 30 seconds, until the car responds by cycling the locks again.
- 6). Repeat Step 5 with any additional remotes and turn the ignition back to the "On" position to end the programming sequence.
Source...