How to Disable the Remote Entry in a 1998 Dodge Ram
- 1). Enter your car and turn the key in the ignition to the "Run" position.
- 2). Press and hold the Unlock button on a remote for around four seconds and continue holding.
- 3). Press and hold the Panic button while holding the Unlock button and hold both buttons for one second before releasing.
- 4). Wait for the chimes to indicate that the programming sequence has been erased and programming mode has been entered. Do nothing further to leave the sequence open and no remotes programmed. Your remotes will then be disabled and you can turn the key to the "Off" position to end the process.
Source...