How to Remove a Drive Belt From a Toyota Truck
- 1). Open the hood and locate the negative battery terminal in your Toyota truck. Remove the retaining bolt from the battery terminal with a wrench and remove the terminal.
- 2). Locate the alternator on the front driver's side of the engine. Locate the pivot bolt at the bottom of the alternator.
- 3). Loosen the pivot bolt with a wrench and push the alternator toward the engine block. If the alternator is too tight, you will need to loosen the top bolt as well to allow it to move.
- 4). Slide the belt off the alternator pulley then off the rest of the engine pulleys. Slide the belt over the blades of the fan and remove it from the engine compartment.
Source...