How to Clean Your Dryer Lint Trap
When you use your dryer, lint tends to accumulate in the lint trap.
These are collected fibres from your laundry loads.
The circulating cycle of a washer and dryer removes fibres from your clothes, thus the collection of lint.
There are lot of damages done to a dryer due to failure in cleaning lint trip.
The collected lint might find its way to your dryer's blower or fan and will cause vibrating or humming noise.
It can also clog exhaust vent if you are using a vented dryer.
As a result, the dryer cannot expel heat easily and will cause overheating.
Not cleaning lint trap also increases fire hazards.
You can prevent all these impending hazards by regularly cleaning your dryer's lint trap.
Here are the steps to follow: 1.
If your dryer is in a close space, make sure you open up closed windows or door for better ventilation.
In fact, maintain good air circulation even when not cleaning your dryer so it will not overheat.
Get rid of the clutter that surrounds your dryer.
Do not put anything on top of your dryer.
This is a machine that needs to "breathe".
2.
Unplug your dryer and make sure it has already cooled down before working on it.
Gently pry the lint trap.
It should come off easily.
3.
There are two ways to remove accumulated lint from the screen.
The first one is to use an attachment of a vacuum cleaner.
Use a shop vacuum to remove all traces of lint.
You can also use a gentle cleaning brush to get rid of stuck lint in the screen holes.
The second method is to put the screen trap in a plastic bag.
The static inside will remove the lint.
Gently rub the plastic on the screen to remove lint.
Once you have removed all of those accumulated, remove the screen trap from the plastic.
Keep the plastic with you and use it again next time you clean until the plastic is full of lint.
4.
Check the exhaust duct but be careful not to peer into it closely.
Use the shop vacuum to remove all traces of lint in the exhaust duct.
5.
Use a soft-bristled brush to clean out dirt in the dryer's blower or fan.
Congratulations! You have just completed your task of cleaning your dryer and preventing potential household fire.
Do these steps two times a month, depending on how often you use your dryer.
These are collected fibres from your laundry loads.
The circulating cycle of a washer and dryer removes fibres from your clothes, thus the collection of lint.
There are lot of damages done to a dryer due to failure in cleaning lint trip.
The collected lint might find its way to your dryer's blower or fan and will cause vibrating or humming noise.
It can also clog exhaust vent if you are using a vented dryer.
As a result, the dryer cannot expel heat easily and will cause overheating.
Not cleaning lint trap also increases fire hazards.
You can prevent all these impending hazards by regularly cleaning your dryer's lint trap.
Here are the steps to follow: 1.
If your dryer is in a close space, make sure you open up closed windows or door for better ventilation.
In fact, maintain good air circulation even when not cleaning your dryer so it will not overheat.
Get rid of the clutter that surrounds your dryer.
Do not put anything on top of your dryer.
This is a machine that needs to "breathe".
2.
Unplug your dryer and make sure it has already cooled down before working on it.
Gently pry the lint trap.
It should come off easily.
3.
There are two ways to remove accumulated lint from the screen.
The first one is to use an attachment of a vacuum cleaner.
Use a shop vacuum to remove all traces of lint.
You can also use a gentle cleaning brush to get rid of stuck lint in the screen holes.
The second method is to put the screen trap in a plastic bag.
The static inside will remove the lint.
Gently rub the plastic on the screen to remove lint.
Once you have removed all of those accumulated, remove the screen trap from the plastic.
Keep the plastic with you and use it again next time you clean until the plastic is full of lint.
4.
Check the exhaust duct but be careful not to peer into it closely.
Use the shop vacuum to remove all traces of lint in the exhaust duct.
5.
Use a soft-bristled brush to clean out dirt in the dryer's blower or fan.
Congratulations! You have just completed your task of cleaning your dryer and preventing potential household fire.
Do these steps two times a month, depending on how often you use your dryer.
Source...