How to Access Comcast Cable Modem Settings
- 1). Connect the coaxial cable connection bringing in the Internet signal to the "In" port on the back of your modem.
- 2). Look on the bottom of the Comcast cable modem. Located on the bottom is a sticker with an "http" address listed. You need this full address to access the settings information.
- 3). Open the Internet browser on your computer.
- 4). Insert an Ethernet cable into one of the "Out" ports on the modem, then insert the opposite end into the "WAN" port on the computer.
- 5). Connect the Comcast cable modem to a power source and power it on.
- 6). Type in the address found under the modem into the URL bar.
- 7). Press "Enter," and the Comcast cable modem settings will appear on the screen. These settings include whether you have the device connected to a wireless router, username and the IP address. Once you have finished adjusting the settings, click "Save" to keep the adjusted settings.
Source...