How to Print Photos on Glass
- 1). Capture the image you want to print to glass using any film camera. Black and white photography works best for printing to glass, especially when you are a beginner.
- 2). Select a small section of glass you wish to print to. Cover the edges of the glass with tape to avoid cutting yourself during the process. Thoroughly clean the glass. Any minute amount of dirt or debris on the glass will cause problems with the outcome.
- 3). Apply a very thin layer of matte medium to the surface of the glass. The purpose of this step is to add slight texture to the glass in order for the emulsion to adhere to the surface. From this point forward, do not touch the surface of the glass with your fingers or other objects. Allow approximately 30 minutes for the matte medium to dry.
- 4). Prepare the darkroom for processing like you would with a normal print. Turn your safelight on. From this point forward, you cannot allow direct light to shine on the glass. Bring the glass and film into the darkroom.
- 5). Apply a generous amount of the liquid emulsion to the surface of the glass. Allow approximately 15 minutes for it to completely dry.
- 6). Expose an image onto the glass in the same way you would expose a photograph onto paper. Exposure time may take more time than a usual print. For this step, you may have to experiment on several pieces of glass to get your desired effect.
Source...