How to Make Your Own Bubble Bags
- 1). Lay out your bubble wrap on a clean, flat surface. Remove any debris from the surface before starting as it might damage the bubble wrap.
- 2). Cut the bubble wrap to fit what you need to place inside of it. The bubble wrap needs to be twice as long as the size of the bag as it will be folded in half.
- 3). Cut one square inch off of both top corners of the bubble wrap. This will be where you can fold the top of the bubble bag down to close it.
- 4). Fold the bag vertically with the bottom edge of the bubble wrap resting right on the corner cut lines. Do not put pressure onto the bubbles as they will begin to break.
- 5). Fold the sides toward the center of the bubble bag and use packing tape to secure them there. Tape along the edge of the entire bag except for the top to make sure it is completely closed in.
- 6). Remove one of the sides of the two sided tape and press it onto the top flap. When you close the bag, remove the other side of the double sided tape and fold the top onto the body of the bag and the tape will hold it in place.
Source...