Making a Bunny Nose

• 1). Cut the top off of your Styrofoam cup about 2 inches from the bottom. Punch two holes close together along the edge of the cup to allow you to breathe while wearing the bunny nose. These holes should be about 1/8 inch from the edge and about 1/4 inch apart.
  
  
• 2). Punch three holes about 1/8 inch apart from each other and about 1/2 inch from the bottom of the cup on each side of the cup. When you punch the holes, you should be holding the cup with the two breathing holes facing toward the floor. The whisker holes should be punched to the right and left from where the breathing holes are. Thread a black pipe cleaner through each set of holes from one side to the other to make the bunny nose whiskers.
  
  
• 3). Glue the two large white pompoms together on the bottom of the cup along the same side of the cup as the breathing holes. Glue the small pink pompom just above the two white pompoms. This all forms the bunny nose.
  
  
• 4). Punch two holes on each side of the rim of the cup about 1/4 inch from the rim. Tie a piece of yarn on each side so that you can secure the bunny nose to your face. Wait about an hour for the glue to dry before attempting to wear your bunny nose.