How to Make a Game Rack
- 1). Set the two 20-inch boards on edge, parallel and spaced 6 inches apart. Position the 1-by-6-by-10-inch boards between them at right angles so the boards are on end and flush with the ends of the 20-inch boards. Screw through the 20-inch boards and into the edges of the 6-by-10-inch boards. Use 12 screws for this task. This is the frame to your game rack.
- 2). Lay your frame flat so it is resting on either set of edges. Place the 18-inch board between the 6-by-10-inch boards at a right angle so it is laying flat. Screw through the 6-by-10-inch boards and into the ends of the 18-inch board. Use two screws for each end.
- 3). Locate studs in the wall where you wish to mount your game rack. Position your game rack against the wall using your level on top of the 20-inch board to ensure that it is horizontal. Screw two screws through the 18-inch board and into each stud to secure the game rack to the wall.
Source...