How to Build a Go Kart the Easy Way
Do you want to know how to build a go kart and build it on the cheap so that you can make it fairly quickly? Now the first thing that you want to begin planning, is the frame for your go kart.
The frame is going to be the foundation for your go kart and ought to be built the right way so you can enjoy it.
You can build a go kart by using the junk material from a worn out lawn mower or a tractor! And your go kart can be easily built using parts from those things like some of the metal pipes, or using some nut bolts, the bucket seat, a few steel clips and so on.
Another aspect of building a go kart is where to position the seat.
A good safe layout is to have the seat so that the passenger is protected from the engine.
Safety should be one of the prominent elements on your list to build your go kart.
Just think if anything on your go kart were to fail, what would be the outcome? The key then is to make sure you put safety first and make everything enjoyable.
Usually, go-karts require a solid steering and suspension system in order to ensure the safety of your go kart and that you can steer it safely.
The go kart steering wheel assemblage will require a steering shaft, which involves the actual steering wheel and the pit arm, and a steering wheel.
Next are the wheels to add to your go kart.
You can find these on Craigslist, tractor wheels or you can buy them at your local lawnmower shop.
You want to make sure that the wheels are rubber and fairly good condition.
Now when you are finished building your go kart, you can reach speeds of up to 20 mph.
It's also a good idea to add a good rail system to ensure the safety of the drivers as well as to avoid maintenance problems with the karts.
Rear disc brakes are also a good idea and will provides sure and efficient stopping power in a variety of conditions for the kids.
You may opt to install brakes on the front as well, thereby reducing all around wear and tear on the system and increasing your safety in the long run.
However, only installing brakes on the front wheel is not an option as it may cause your go kart to flip over.
The frame is going to be the foundation for your go kart and ought to be built the right way so you can enjoy it.
You can build a go kart by using the junk material from a worn out lawn mower or a tractor! And your go kart can be easily built using parts from those things like some of the metal pipes, or using some nut bolts, the bucket seat, a few steel clips and so on.
Another aspect of building a go kart is where to position the seat.
A good safe layout is to have the seat so that the passenger is protected from the engine.
Safety should be one of the prominent elements on your list to build your go kart.
Just think if anything on your go kart were to fail, what would be the outcome? The key then is to make sure you put safety first and make everything enjoyable.
Usually, go-karts require a solid steering and suspension system in order to ensure the safety of your go kart and that you can steer it safely.
The go kart steering wheel assemblage will require a steering shaft, which involves the actual steering wheel and the pit arm, and a steering wheel.
Next are the wheels to add to your go kart.
You can find these on Craigslist, tractor wheels or you can buy them at your local lawnmower shop.
You want to make sure that the wheels are rubber and fairly good condition.
Now when you are finished building your go kart, you can reach speeds of up to 20 mph.
It's also a good idea to add a good rail system to ensure the safety of the drivers as well as to avoid maintenance problems with the karts.
Rear disc brakes are also a good idea and will provides sure and efficient stopping power in a variety of conditions for the kids.
You may opt to install brakes on the front as well, thereby reducing all around wear and tear on the system and increasing your safety in the long run.
However, only installing brakes on the front wheel is not an option as it may cause your go kart to flip over.
Source...