How to Program a Keyless Remote for a 1999 Ford Expedition
- 1). Get behind the wheel of your Expedition and put the key into the ignition without turning it on. Make sure the doors are closed.
- 2). Turn the key from the "OFF" position to the "RUN" position eight times within 10 seconds. End the eighth turn in the "RUN" position.
- 3). Listen for the locks to engage. This will let you know that you are now in programming mode.
- 4). Press any key on the fob within about 20 seconds of the doors locking. The door locks will engage and open to let you know the programming is complete.
- 5). Press a button on a secondary remote--if you have one--to program it as well. Locks will engage and open again.
- 6). Turn the key to the "OFF" position. Locks will cycle again to let you know you are exiting the car's program mode.
Source...