Physical Specifications

• The Velodyne Impact-10 cabinet measures 13.6 inches high, 12.6 inches wide and 14.9 inches deep. Its shipping weight is approximately 30 lbs. The color of the cabinet and the removable grille is black. The design of the cabinet is acoustically neutral with a down-firing port.
  
  

Power and Performance

• This subwoofer (as supplied for the American market) runs on standard American house current of 120 volts at 60 cycles (hertz). A 220-240 volt version is also available. It produces 250 watts of dynamic power (peak) or 150 watts RMS.
  
  

Subwoofer and Audio Specifications

• The subwoofer itself is a 10-inch coated fiber cone with a piston diameter of 8.2 inches. Its magnet structure weighs 5.6 lbs. The voice coil is 2 inches in diameter, and it is copper-wound. Frequency response is from 32 to 140 hertz, and it features full-range speaker level pass-through. Impedance is rated at 65K ohm for line input jacks and 1.2K ohm for speaker level input terminals. Phase is 0 or 180 degrees, and sensitivity is 1.0V for speaker level and 100 mV for line input.
  
  

Input and Output Jacks

• The Velodyne Impact-10 includes left and right speaker level pass-throughs and RCA line level, LFE and speaker level inputs.
  
  

Additional Features

• This model has an auto on/off feature as well as an LED power indicator light.