How to Attach a Digital Camera to a Motorcycle Handlebar
- 1). Cut the "T" coupling using the rotary tool so that one half resembles a half-pipe and the other half has the threaded juncture of the coupling.
- 2). Drill a hole through the center of the threaded cap.
- 3). Insert the hex bolt through the bottom of the threaded cap and secure it in place with a washer and nut. Tighten the nut as securely as possible.
- 4). Thread the cap onto the juncture of the "T" coupling. This is the top half of the camera mount.
- 5). Unscrew both hose clamps all the way.
- 6). Place the top half of the camera mount on the handlebars. Place the other piece of the coupling underneath the mount so that the coupling wraps around the handlebars.
- 7). Wrap the hose clamps around the couplings and tighten them into place. One clamp should go on either side of the coupling.
- 8). Screw your camera into place on the bolt sticking out of the top of the mount.
Source...