How to Program the Ford Explorer Remote Door Lock
- 1). Get into the vehicle and close all the doors. Put the key in the ignition.
- 2). Turn the key from the "Off" to the "Run" position five times. Stop in the "Run" position. Listen for the doors to lock and unlock to indicate the programming mode is active.
- 3). Push the "Unlock" or "Lock" button on the remote that needs to be programmed. Listen for the doors to lock and unlock to indicate that the remote is programmed to the vehicle's system.
- 4). Turn the ignition key to the "Off" position. Listen for the doors to lock and unlock to indicate that you have exited the programming mode.
- 5). Test the newly programmed remote by pressing the "Unlock" and "Lock" buttons located on it. Repeat the programming process if the remote is not operational.
Source...