Regular Method

• 1). Switch the lever at the top of the white wall switch timer to "Off/Clear" for 20 seconds. A red light illuminates to indicate that all previous settings are clear.
  
  
• 2). Switch the lever to the "On" position and look for the blinking red light. Twist the dial to the right or clockwise to the 30-minute mark that's closest to the current time. Push the knob in one time to save the current time and look for the red light to disappear.
  
  
• 3). Twist the knob to the right, until you reach the time setting for the first activation. A red light blinks with each click of the knob. Push the knob in once to save the desired activation time. The light connected to the switch illuminates. Twist the knob to the right, until you reach the deactivation time and push the knob once. The connected light turns off. Repeat this step to set up as multiple activation and deactivation times. When you're done, twist the knob, until the red light illuminates and remains illuminated, to indicate that the schedule is in effect.
  
  

24-Hour Method

• 1). Move the lever at the top of the switch timer to the "Off/Clear" position for 20 seconds. A red light illuminates and then turns off, indicating that all previous programming has been erased.
  
  
• 2). Move the lever to the "On" position. The red lights blink.
  
  
• 3). Push the knob in to turn the connected light on and off at the exact times you want to schedule the light to turn on and off respectively for the next 24 hours. After 24 hours passes, the red timer light remains on, indicating that the schedule is saved and in effect.
  
  

Review Settings

• 1). Twist the knob to the right to the closest half-hour of the current time.
  
  
• 2). Push the knob in one time to activate the setting review cycle. The red timer light turns off.
  
  
• 3). Turn the knob slowly to the right and note the times that the connected light illuminates and turns off.
  
  
• 4). Push the knob in once more to turn the review cycle off and activate the schedule. The red timer light turns on and remains on.