Drilling with a right-angle drill and an auger bit is the most common way to run the wire through interior, un-insulated walls. Some of the larger drills have right-angle attachments, or you can rent a right-angle drill from a local tool rental establishment.

Notching rather than drilling the studs works best when you have insulation you don't want to compress. Use a chalk line to snap two lines 1" apart across the studs. These will indicate the path the wire will follow for home wiring. Use a circular saw set to cut 1/2" notches at those lines on each stud. Then use a chisel to carefully remove those blocks. After placing the cable, cover the notches with nail guards to prevent accidental nailing into the wire.

Smart home wiring is increasingly common in new homes, and many homeowners with older buildings are taking the time and effort to rewire their houses in this fashion as well. Specifically, smart wiring refers to a comprehensive wiring setup in a home, including all types of electrical power and wiring in each room. This allows for the greatest flexibility over the long term and as technology continues to advance. A smart wired house will not require remodeling or other modification when a new technology becomes available or if the owner decides to add an electrical device to any particular room. Smart wiring your home is an extensive process and can be expensive, so it's best to follow these tips in order to save time, money and effort.

One of the most important but also frequently overlooked elements of a smart wiring project is the location and type of wall outlets. Generally, outlets should be every 5 to 8 feet in most rooms. Consider other factors while designing your smart wiring system, such as overall room use and ideal height positioning for wall outlets. Ideally, outlets should be readily accessible from any location in a home, but not glaring or overly visible.

Kitchens, bathrooms and utility closets often benefit from having wall outlets placed above the ground level. However, you may also want to consider the location of your furniture and potential future electrical needs in other rooms when deciding how to place your outlets. A bureau or dresser can conveniently cover a mid-level wall outlet that can be accessed from a number of different locations in the room.

A structured wiring system delivers all of the various types of cabling throughout the home. If you anticipate adjusting your electrical needs at any point in the future, a structured wiring system is ideal in terms of flexibility.

It is also important that you utilize types of wire that are well-suited for long term and varied use. Copper wiring is the material of choice when setting up smart wiring systems in a home, as it has a multitude of different uses and carries a low risk of fires and other damage. For further advice about materials and other wiring questions that you may have for your home in particular, speak with an electrician or a specialist at a hardware store.

Electrical surges can damage or completely ruin a variety of electrical devices. Computer hard drives can be lost and other devices may be rendered unusable after a surge. To protect your electronic products against such an occurrence, invest in surge protectors to be placed at the head of each wiring system. You may also wish to further protect your television sets, computers and other expensive products with additional surge protective devices.