How to Upgrade the Hard Drive for the Fujitsu T4215
- 1). Turn the LifeBook off and disconnect the power cord.
- 2). Close the LifeBook and turn it face down.
- 3). Remove the LifeBook's battery. The hard drive cover cannot be removed if the battery is on the computer.
- 4). Remove the screw holding the hard drive cover. Slide the cover to the right to remove it. The cover only has one screw.
- 5). Remove the two screws holding the caddy. Slide the caddy to the left to take it out.
- 6). Slide the new hard drive into the caddy. Slide the assembly back into the computer.
- 7). Replace the screws that hold the caddy. Replace the cover and cover screw.
- 8). Replace the battery and turn the computer over.
- 9). Plug the power cord in and boot the computer.
- 10
Wait while the computer recognizes the new drive. - 1). Turn the computer off and remove the power cord.
- 2). Remove the battery.
- 3). Unlock the built-in drives release button and slide the cover down.
- 4). Remove the drive by sliding it out.
- 5). Insert the new built-in drive and lock the cover.
- 6). Replace the battery and the power cord.
- 7). Reboot the computer and wait for the computer to recognize the new drive.
Hard Drive Location on Bottom
Built-In Drive on Side
Source...