How to Program a Ford Econoline 2007 Transponder Key
- 1). Insert your Econoline's key into the ignition.
- 2). Start your van's engine and then quickly turn it off. Repeat this step eight additional times within 10 seconds. The engine should remain on after the last cycle and your van's door locks should lock and unlock to confirm that the van has entered the programming mode.
- 3). Press the "Lock" button the van's keypad within 20 seconds of entering the programming mode. The door locks should again lock and unlock to confirm the programming has been successful. You may also press "Lock" on additional remotes during this time within 20 seconds to program them.
- 4). Turn off your Econoline and remove the key from the ignition.
Source...