How to Set Up an HP LaserJet 5000 GN Via IP
- 1). Click the "Menu" button until you see the "EIO" menu. Click "Item" until you see "Cfg Network=No." Press the "Value" button to change the "No" to a "Yes."
- 2). Press the "Item" button and go to "Cfg TCP/IP." Use the "Value" button to change the setting to "Yes."
- 3). Click the "Item" button and choose "IP Byte 1." Use the "Value" button to set the first number in the IP address. The IP address consists of four numbers between 0 and 255, each separated by a period. Your network administrator can give you the address to use.
- 4). Press the "Select" key to accept the first digit in the IP address. Click the "Item" button to go to the "IP Byte 2" option. Set that number using the "Value" buttons, then click "Select" to accept the choice. Do the same with the "IP Byte 3" and "IP Byte 4" options.
- 5). Click the "Menu" button and choose "Print Configuration" from the list. Click "Select" to print the configuration page. Review the network section of the configuration page to make sure the IP address is set correctly.
Source...