How to Make an Armitron Watch Smaller
- 1). Place the watch on your wrist to measure the length that needs to be adjusted to fit properly. Pinch the excess watch links in between two fingers. Count the links that you are pinching and add one. This is the amount of links to be removed.
- 2). Press the straight pin into the small hole near the clasp to release a spring. This spring will let you remove the wristband.
- 3). Place the wristband upside down. Observe the links that have arrows. These are the links that can be removed. Choose which links that you want to remove.
- 4). Using a flat-head or jeweler's screwdriver to remove the link pins in the direction that the arrows indicate. This should be easily done by pressing slightly with the screwdriver. Remove the pins on either side of the link.
- 5). Re-attach the wristband to the watch by pressing until the release spring has clicked back into place. Place the watch on your wrist to measure. Adjust again if needed.
Source...