How to String Shark Teeth to Wood
- 1). Measure and cut the jewelry wire into 3-inch pieces with the wire cutters. Bend one end of the wire into a small loop with the needlenose pliers.
- 2). Position the center of the wire over the top portion of the shark tooth. Bend the ends of the wire toward the backside of the tooth.
- 3). Loop the left side of the wire diagonally over the right side of the tooth. Loop the right side of the wire diagonally over the left side of the tooth.
- 4). Pull the ends of the wire back and twist them together using the needlenose pliers.
- 5). Repeat this process to warp the remaining shark teeth with jewelry wire.
- 6). Position the shark teeth in rows on the wood display Secure each wire to the wood with a small screw by using a power drill.
Source...