Power Amplifier Mobil 4 Channel Kenwood KAC-6203
Since an audio power amplifier mobil is just like an engine for a car in music lover perspective, it is good to have one that offers a decent amount of watts for driving your audio system. In this case, we'll testing this two channel Kenwood KAC-6203 car audio amplifier rated at 100w to a set of speakers rated at 75w RMS and 100W peak, which would be match with the speaker system requirement. This amp older brother 7204, has CEA-2006 compliance power rating and this little brother is just the same. And with a 100dB Signal To Noise Ratio, on the paper it will sounds clean and rockin loud.
MOS-FET POWER SUPPLY UNIT
Amplifier have two main circuit. First is the part that maintain electricity and convert the current called Power Transistors and another one is those who powering your speaker. The quicker that both can eat power and puke watts, the better it is. So, a power supply unit common shortened as PSU is more powerful if it has MOS-FETs in it. An amplifier unit is even better if the output is MOS-FET too but PSU is essential matter.
SIGNAL TO NOISE RATIO
All kind of car audio amplifiers have signal to noise ratios and this Class AB power has one of 100dB, making it a lot better compared to most Class D amps out there. Take a look at the bulky paper on class D amplifiers and see if any specification leads you there.
CEA-2006 COMPLIANT
Introduced as a standard measuring of rating power specifficaly in terms of mobile amplifier performance replacing the old one EIA 517B.While €peak' is a thing that matters to quote in the past, we now like RMS ( Root Mean Square ) more. That is €the real€ amounts of power.Although there is so many different ways to measure power, clarity and speed of amps. By the way, the USA Consumer Electronics Association or knowned as CEA bring back a true power rating system back in 2006. If your audio mobil products earn a CEA compliance rating,we can tell if the specification writtenont the papar is quite true.
DIE CAST HEATSINK
To be honest, if you like how the stuff look,you're gonna love this one.A large sized piece of extruded cast aluminium wrap the whole body of the amps which is good, a cast chassis looks tougher and it also means the heat that produced while you kick in the amps can be taken out through the heat sink. This amps design is chunky and purposeful.
POWER!
Load Capability: 2 Ohm Stable
Maximum power output: 600W
Rated power output: 100W x 2 (4 Ohm)
Rated power output: 150W x 2 (2 Ohm)
Bridged power output: 300W x 1 (4 Ohm)
RCA up to 5V or Speaker Level input
Car audio amplifier mobil Kenwood KAC-6203 sold at price of 99 or $135,actual pricing on the market may different.
MOS-FET POWER SUPPLY UNIT
Amplifier have two main circuit. First is the part that maintain electricity and convert the current called Power Transistors and another one is those who powering your speaker. The quicker that both can eat power and puke watts, the better it is. So, a power supply unit common shortened as PSU is more powerful if it has MOS-FETs in it. An amplifier unit is even better if the output is MOS-FET too but PSU is essential matter.
SIGNAL TO NOISE RATIO
All kind of car audio amplifiers have signal to noise ratios and this Class AB power has one of 100dB, making it a lot better compared to most Class D amps out there. Take a look at the bulky paper on class D amplifiers and see if any specification leads you there.
CEA-2006 COMPLIANT
Introduced as a standard measuring of rating power specifficaly in terms of mobile amplifier performance replacing the old one EIA 517B.While €peak' is a thing that matters to quote in the past, we now like RMS ( Root Mean Square ) more. That is €the real€ amounts of power.Although there is so many different ways to measure power, clarity and speed of amps. By the way, the USA Consumer Electronics Association or knowned as CEA bring back a true power rating system back in 2006. If your audio mobil products earn a CEA compliance rating,we can tell if the specification writtenont the papar is quite true.
DIE CAST HEATSINK
To be honest, if you like how the stuff look,you're gonna love this one.A large sized piece of extruded cast aluminium wrap the whole body of the amps which is good, a cast chassis looks tougher and it also means the heat that produced while you kick in the amps can be taken out through the heat sink. This amps design is chunky and purposeful.
POWER!
Load Capability: 2 Ohm Stable
Maximum power output: 600W
Rated power output: 100W x 2 (4 Ohm)
Rated power output: 150W x 2 (2 Ohm)
Bridged power output: 300W x 1 (4 Ohm)
RCA up to 5V or Speaker Level input
Car audio amplifier mobil Kenwood KAC-6203 sold at price of 99 or $135,actual pricing on the market may different.
Source...