How to Do a Scatter Plot if It Is About Height?
- 1). Arrange the data into two columns, with one variable per column. In this example, the data may look like:
Height, inches
65
74
78
76
64
66
77
65
65
Weight, pounds
152
218
235
194
177
160
245
152
150 - 2). Determine the range of your x-axis values by subtracting the smallest number from the largest. In this example, 78-64 = 14. The x-axis will start at 64 and contain 14 increments of one to the value 78.
- 3). Determine the range of your y-axis values by subtracting the smallest number from the largest. In this example, 235-177=58. The y-axis will start at 177 and contain 58 increments of one to the value 235.
- 4). Plot each value as the intersection of the x and y variables. For example, one of the person's measurements in this data set are 74 inches, 218 pounds. Locate the tick mark corresponding with the 74 inch value on the x-axis and then go upwards until this value aligns with the 218 pound mark on the y-axis. Place a dot at this intersection. Plot each value in the same way to complete the scatter plot.
Source...