Simple Instructions for Setting a Pool Filter Pump
- 1). Create a level area for the pool filter pump using paving stones and a leveling tool. The pump should be set two to three feet away from the pool filter in between the filter and pool skimmer.
- 2). Attach the pool filter pump to the filter using a piece of pool hose. Connect the outlet valve on the pool pump to the inlet valve on the pool filter. The valves, on the side of each unit, are labeled as outlet or inlet. Secure the hose in place by placing a hose clamp on each end. Tighten the hose clamp using a flat-head screwdriver.
- 3). Connect the pool skimmer outlet valve to the pool filter pump inlet valve with another piece of pool hose. Secure the valve using two more hose clamps. Tighten using the flat-head screwdriver.
- 4). Connect the power source for the pool pump by plugging the electrical cord into an outlet. Allow the water to cycle through the system.
Source...