How to Program the Keyless Entry on a 2001 Town & Country Van
- 1). Enter your vehicle with your ignition key and keyless remote in hand and press the lock button five times on your remote in quick order.
- 2). Insert your key into the igniton and turn the key to the "Run" position, waiting for the chimes to stop ringing.
- 3). Press and hold the "Unlock" button on your keyless remote for four seconds, and then press the "Panic" button for one second while still holding the "Unlock" button. Release both buttons at the same time and wait for a chime to again sound.
- 4). Press the lock and unlock buttons on your remote for one second, and then just the unlock button by itself for one second. Wait for the chime to indicate that the programming was successful.
- 5). Repeat Step 4 with any additonal remotes you would like to program and turn the ignition key to the "Off" position to end the programming sequence.
Source...