Lifetime Shed Installation Helps
What is a Lifetime Shed? Lifetime Sheds are a storage product made by Lifetime Products.
These buildings are built to allow a large variety of storage floor plans.
Among those plans are an 11 ft.
wide model, an 8 ft.
wide model, and a side entry model.
Lifetime Products calls these models Lifetime Storage Buildings, Lifetime Sheds, and Lifetime Garden Sheds respectively.
The storage building models allow you to create a shed up to 21 ft.
long without affecting the warranty.
Both the Lifetime Shed and Garden Shed models allow you to extend up to 15 ft.
in length without affecting the warranty.
Lifetime storage sheds are made with polyethylene plastic for the wall, roof, and floor panelling.
This plastic, specifically, is called HDPE (High-Density Polethylene Plastic).
The benefit of this plastic is that it is UV resistant.
What this means to you is that the plastic will not fade, crack, or peel when exposed to the sunlight.
The walls, doors, and roofing are all steel reinforced making them very sturdy.
Tips for Lifetime Storage Shed assembly: For ease of assembly, you should always have at least 2 adults assisting each other.
The reason for this is the assembly requires you to hold the wall, roof, and floor panels in place while another person puts in the screws and snaps the panels into place.
All together, the procedure can take anywhere from 2 - 5 hours depending on handiman skills and how many people are helping.
An important tip Lifetime mentions is to not completely tighten any panel until all the panels are in place.
By doing this, you will find it much easier to snap the panels into place and to move them into the proper position.
Difficulties in Lifetime Shed Assembly: Probably the most difficult part of installation is preparing the proper surface for the shed to set upon.
The floor panelling is designed such that it cannot function as a load bearing surface, so some other surface must be constructed.
Lifetime Products suggests using either a concrete surface or a wood platform.
Both of these options are discussed in the installation instructions for any base model shed, which can be provided upon request.
The concrete option is the most common platform that used, but the wood makes for another economical approach to this.
The wood platform suggested by Lifetime Products consists of 2 x 4's with a plywood panel.
The exact specs and construction of this, once again, will be contained in your delivered packaging, or upon request.
Have fun shopping!
These buildings are built to allow a large variety of storage floor plans.
Among those plans are an 11 ft.
wide model, an 8 ft.
wide model, and a side entry model.
Lifetime Products calls these models Lifetime Storage Buildings, Lifetime Sheds, and Lifetime Garden Sheds respectively.
The storage building models allow you to create a shed up to 21 ft.
long without affecting the warranty.
Both the Lifetime Shed and Garden Shed models allow you to extend up to 15 ft.
in length without affecting the warranty.
Lifetime storage sheds are made with polyethylene plastic for the wall, roof, and floor panelling.
This plastic, specifically, is called HDPE (High-Density Polethylene Plastic).
The benefit of this plastic is that it is UV resistant.
What this means to you is that the plastic will not fade, crack, or peel when exposed to the sunlight.
The walls, doors, and roofing are all steel reinforced making them very sturdy.
Tips for Lifetime Storage Shed assembly: For ease of assembly, you should always have at least 2 adults assisting each other.
The reason for this is the assembly requires you to hold the wall, roof, and floor panels in place while another person puts in the screws and snaps the panels into place.
All together, the procedure can take anywhere from 2 - 5 hours depending on handiman skills and how many people are helping.
An important tip Lifetime mentions is to not completely tighten any panel until all the panels are in place.
By doing this, you will find it much easier to snap the panels into place and to move them into the proper position.
Difficulties in Lifetime Shed Assembly: Probably the most difficult part of installation is preparing the proper surface for the shed to set upon.
The floor panelling is designed such that it cannot function as a load bearing surface, so some other surface must be constructed.
Lifetime Products suggests using either a concrete surface or a wood platform.
Both of these options are discussed in the installation instructions for any base model shed, which can be provided upon request.
The concrete option is the most common platform that used, but the wood makes for another economical approach to this.
The wood platform suggested by Lifetime Products consists of 2 x 4's with a plywood panel.
The exact specs and construction of this, once again, will be contained in your delivered packaging, or upon request.
Have fun shopping!
Source...