How to Make a Smoke Pipe
- 1). Find a corn cob a core with a diameter of at least 1 inch. Dry the core for 1 day.
- 2). Cut the sides of the corn cob until only the core remains. Use a steak knife. Cut the core of the corn to the length of 2 inches. Use a steak knife.
- 3). Place the core into a vice-grip. Drill a hole with a half-inch diameter and a depth of ½-inch. Use a power drill and half-inch drill bit.
- 4). Drill a 1/8-inch hole in the side of the corn cob. The 1/8-inch hole should connect to the ½-inch hole. Use a power drill and 1/8-inch drill bit.
- 5). Cut a 1/8-inch wood dowel to the length of 3 inches. Use a table saw. Drill a 1/16-inch hole into the center of the wood dowel. Use a power drill and 1/16-inch drill bit.
- 6). Place the wood dowel into the hole of the core of the corn cob. Place tobacco inside the half-inch hole of the core. Light the tobacco and enjoy your new smoke pipe.
Source...