How to Make a Predator Out of Legos
- 1). Connect the body and leg pieces together. Attach the 1-by-1 multi-stud piece to the neck stud of the Lego knight body. This will create the basis of the head.
- 2). Attach the 1-by-1 circle grab piece to the top peg of the multi-stud piece.
- 3). Connect the 1-by-1 slanted piece to the front face peg of the multi-stud piece so that the top hole of the slant is connected to the stud. The slant piece will be protruding to create the face.
- 4). Attach all the antenna pieces to the open pegs at the side of the head to create the snakelike hair of the Predator.
- 5). Connect the remaining circle grab piece to the 90-degree circle with one peg so that it is setting on the top of it. Slide the stud through the hole in the 90-degree circle piece and secure it to the peg in the back of the piece. This will make the Predator's cannon.
- 6). Connect the cannon to the body piece of the Predator by snapping it into place on one of the shoulders with the stud piece facing forward.
Source...