Installation of Chubb CCTV
- 1). Select a location for the camera. Near an entrance, such as windows and door or a driveway is ideal. The camera should be impossible for someone standing to reach it, so mount it high.
- 2). Drill the camera's mount into the wall. The exact type of screws required depends on which model Chubb camera is being used and what the material you are drilling into.
- 3). Connect a power source. Some cameras are battery powered, others have an external power source, such as an electrical plug.
- 4). Connect the A/V cable to the camera. This will usually be a coaxial cable. Screw it into the camera's "Signal Out" port.
- 5). Run this cable into the main monitoring station.
- 6). Connect the coaxial cable to the input source. This may be a monitor, VCR/recorder or Chubb control module. Either way, connect the coaxial cable to an input port.
- 7). Plug in the input source and test the system.
Source...