How to Prime After Running Out of Diesel Fuel in a Ford F250
- 1). Fill the fuel tank with diesel fuel and diesel fuel lubricity additive. Raise the hood of the car. Open the top fuel filter housing with the socket set. Depending on the model year and engine type, the filter housing may be located in several places; however, you will most likely find it near the oil filter housing, marked accordingly.
- 2). Pour diesel fuel into the filter housing until the fuel reaches the bottom of the threaded area where the filter cap attaches.
- 3). Reinstall the filter cap, taking care not to pinch or bind the O-ring.
- 4). Close the hood and climb into the driver's seat. Leave the driver's door open.
- 5). Turn the ignition key to the "Run" position and listen for the fuel pump to start and stop. This should take about ten seconds. Turn the key to the "Off" position when you hear the pump shut off. Repeat this four more times and then start the truck.
Source...