Say Goodbye to the Jello Effect and Welcome The Best Aerial Video
There are lots of people that are interested in aerial videography, but the major problem is the jello effect obtained in the video.
It makes a portion of the video wiggly and unusable.
Hence, a wonderful shot can turn out to be useless and result in sheer frustration.
This article will explain the causes and solutions of the problem.
The Appearance of Jello: The vibrations caused while capturing videos are the main reasons for the jello.
There are several things that you can do to reduce vibrations.
Learn to balance your props so that there is no vibration.
Buy a good prop balancer that will not cost you more than $40.
In the course of time, you will learn the act of balancing props.
If the motor is out of balance, it will be little complicated to balance, but it is not impossible.
You can tape a small laser pointer under the motor one at a time.
Once you have completed this process, you should point it towards a wall that is at least 6 feet away.
Now you should spin the motor.
If there is any movement in the laser dot, you need to balance more.
Do not forget to use the right piece of gimbal dampeners on the camera.
Softer gimbal dampeners will vibrate too much and harder ones will not dampen the vibrations.
Softer ones are suitable for cold weather because they get stiffer.
Appropriate Settings in the Camera: Once you have made the efforts in reducing efforts, you will have to take a last look at the camera settings.
Fast shutter speeds tend to increase the jello effect.
On the other hand, slower speed will reduce the effect.
You should want a shutter speed that is double the frame rate.
Most cameras that fly have a fixed aperture of f/2.
8 due to which the most amount of light comes in.
a lower shutter speed will reduce the aperture.
Most cameras do not have facilities of aperture adjustment due to which a superfast shutter speed will show much more jello effect.
Now that you know that a fast shutter speed is bad and you cannot adjust the aperture to limit the light, you will have to find an alternate option to limit the amount of light entering into the camera.
Using a Natural Density (ND) filter is one of the best ways through which you can limit coming into the camera.
This filter is a dark glass piece that is designed to reduce the light and allow a slower shutter speed.
Different people have different preferences for setups and the filter they buy can also vary to get perfect or near to perfect effects.
It makes a portion of the video wiggly and unusable.
Hence, a wonderful shot can turn out to be useless and result in sheer frustration.
This article will explain the causes and solutions of the problem.
The Appearance of Jello: The vibrations caused while capturing videos are the main reasons for the jello.
There are several things that you can do to reduce vibrations.
Learn to balance your props so that there is no vibration.
Buy a good prop balancer that will not cost you more than $40.
In the course of time, you will learn the act of balancing props.
If the motor is out of balance, it will be little complicated to balance, but it is not impossible.
You can tape a small laser pointer under the motor one at a time.
Once you have completed this process, you should point it towards a wall that is at least 6 feet away.
Now you should spin the motor.
If there is any movement in the laser dot, you need to balance more.
Do not forget to use the right piece of gimbal dampeners on the camera.
Softer gimbal dampeners will vibrate too much and harder ones will not dampen the vibrations.
Softer ones are suitable for cold weather because they get stiffer.
Appropriate Settings in the Camera: Once you have made the efforts in reducing efforts, you will have to take a last look at the camera settings.
Fast shutter speeds tend to increase the jello effect.
On the other hand, slower speed will reduce the effect.
You should want a shutter speed that is double the frame rate.
Most cameras that fly have a fixed aperture of f/2.
8 due to which the most amount of light comes in.
a lower shutter speed will reduce the aperture.
Most cameras do not have facilities of aperture adjustment due to which a superfast shutter speed will show much more jello effect.
Now that you know that a fast shutter speed is bad and you cannot adjust the aperture to limit the light, you will have to find an alternate option to limit the amount of light entering into the camera.
Using a Natural Density (ND) filter is one of the best ways through which you can limit coming into the camera.
This filter is a dark glass piece that is designed to reduce the light and allow a slower shutter speed.
Different people have different preferences for setups and the filter they buy can also vary to get perfect or near to perfect effects.
Source...