How to Replace the Vinyl Flooring That Is Rolled Up on the Wall
- 1). Cut through the damaged portion of flooring with a flooring knife to create a box or rectangle. Use a straightedge as a guide when making the cut.
- 2). Peel the cut piece away from the floor.
- 3). Lay the cut piece onto the replacement flooring. It is critical to match the pattern of the cut piece with that of the replacement flooring.
- 4). Cut through the replacement flooring with the flooring knife, using the edges of the old piece as a guide.
- 5). Spread a 3-inch-wide band of multipurpose flooring adhesive to the underlying floor with a wallboard knife. Apply the adhesive next to the edge of the existing vinyl floor and against the edge of the wall.
- 6). Position one side of the new piece onto the flooring adhesive and against the edge of the existing vinyl floor, then gradually roll the new piece over the adhesive.
- 7). Press the edges of the new piece into the adhesive with a J-roller.
Source...