How to Program the Keyless Entry For a 2001 Oldsmobile Aurora
- 1). Enter your Aurora with your ignition key and keyless remote in hand and close all of the car's doors behind you.
- 2). Insert and remove the key from the ignition.
- 3). Press and hold the "Unlock" tab on the driver's side door and be prepared to hold it pressed through the following step.
- 4). Insert and remove the key from the ignition three times in a row and release the "Unlock" tab after the third time. Wait for the vehicle to emit three beeps, indicating the beginning of the programming sequence.
- 5). Press and hold the "Unlock" and "Lock" buttons on your keyless remote until the system beeps again, indicating that the programming of the remote was successful.
- 6). Repeat step 5 with any additional remotes, and remove the key from the ignition to end the programming sequence.
Source...