How to Warm Massage Rocks
- 1). Place a white hand towel in the bottom of the stone heater. (Reference 4)
- 2). Arrange the stones in a layer on top of the hand towel.
- 3). Fill the heater 2/3 full with water, completely submerging the stones.
- 4). Cover the heater with the lid provided.
- 5). Plug the heater in to a power source and switch on.
- 6). Set the temperature dial to between 120 and 130 degrees or "low."
- 7). Remove the lid after 15 minutes and use a thermometer to check the water has been heated to between 120 and 130 degrees. (The water should be the correct temperature by this time, but leave for another two minutes before checking the temperature again if needed.)
- 8). Begin using the stones only once the correct temperature is reached.
Source...