How to Program a Dodge Truck Keyless Remote
- 1). Enter your car with, using your working keyless remote and ignition key, and turn the key in the ignition to the "Run" position.
- 2). Press and hold the "Unlock" button on your working remote for about 10 seconds, then press and hold the "Panic" button while still holding the "Unlock" button.
- 3). Hold both buttons for one second and release both at the same time. Wait for the door locks to cycle automatically.
- 4). Press any button on the remote that you would like to program within 30 seconds to program it. Turn the ignition key back to the "Off" position to end the programming mode once you are done.
Source...