How to Convert RGB to RGBHV
- 1). Plug the three connectors at one end of the component video cable into the three output jacks on the source producing the signal. Match the red, green and blue color codes on the RCA push-in connectors to the colors on the jacks. The Y signal uses green, the Cr or Pr uses red and the Cb or Pb uses blue.
- 2). Plug the three connectors at the other end of the component video cable into the input jacks on the converter. Follow the same color code.
- 3). Connect one end of the VGA cable to the 15-pin VGA output of the converter and the other end into the 15-pin input connector on the VGA monitor.
- 4). Connect one end of the power adapter cord into the converter and the other end into a wall socket.
Source...