Removing the Current Radio

• 1). Unscrew and remove the dash panel beneath the steering wheel.
  
  
• 2). Unbolt the lower-left side of the dash with the ratchet and socket.
  
  
• 3). Remove the panel from the dashboard.
  
  
• 4). Remove the screw on the lower-left of the glove box.
  
  
• 5). Unbolt the lower-right of the dash.
  
  
• 6). Open the glove box and remove all screws from the top of the dash.
  
  
• 7). Remove the glove box.
  
  
• 8). Remove the right side of the dash.
  
  
• 9). Remove the screw from the upper-left side of where the glove box used to be.
  
  
• 10
  
  Pull the lower half of the console beneath the radio out, using your hands.
  
  
• 11
  
  Remove the climate control buttons.
  
  
• 12
  
  Remove the black bezel from around the radio with your pick tool.
  
  
• 13
  
  Remove the last remaining screw on the lower-right side.
  
  
• 14
  
  Remove the panel from around the ignition switch.
  
  
• 15
  
  Remove the panel from around the radio.
  
  
• 16
  
  Remove the radio from the dashboard with your screwdriver.
  
  
• 17
  
  Remove the wiring harness.
  
  

Installing the New Stereo

• 1). Insert the installation sleeve for the new stereo into the mounting dock and fold out the holding tabs with your screwdriver.
  
  
• 2). Pull the wiring and antennae cable through the sleeve.
  
  
• 3). Attach the wiring to the wiring harness and attach the harness connectors to the radio before attaching the antennae lead to the back of the radio.
  
  
• 4). Push the radio into its place in the mounting dock.
  
  
• 5). Follow the instructions from Section 1 in reverse to finish the installation.