Keyless Entry Remote Programming Instructions for a 2006 Malibu
- 1). Enter your Malibu with your keyless remote and your ignition key and close all of the vehicle's doors behind you.
- 2). Insert the key into the car's ignition and hold down the "Unlock" tab on the driver's side door. You will have to continue holding this tab through the following step.
- 3). Cycle the key to the "On" position and back to the "Off" position two times in quick succession.
- 4). Release the "Unlock" tab on the driver's door and wait for the locks to cycle to indicate the beginning of the programming sequence.
- 5). Hold down both the unlock and lock buttons on your remote until the vehicle again responds by cycling the locks. At this point, the remote will be successfully programmed.
- 6). Repeat step five with any additional remotes, waiting for the locks to cycle after every remote.
- 7). Turn the ignition back to the "On" position to end the programming sequence and your remotes will be ready for use.
Source...