How to Program a Nissan Smart Key
- 1). Close all doors and lock them using the driver's door control panel.
- 2). Insert the ignition key, but don't turn it. Take it back out.
- 3). Repeat Step 2 five more times, all in under 10 seconds. Don't do it too fast, though. If you did it to the right count and right speed, the car will flash its hazard lights.
- 4). Push the lock button on the first remote within five seconds of ending Step 4. The hazard lights flash again if you did it right.
- 5). Unlock and relock all the doors from the driver's door control panel, if you have another remote to program.
- 6). Push the lock button on the next remote within five seconds of completing Step 6.
- 7). Repeat Steps 6 and 7 for each additional remote.
- 8). Remove the ignition key.
- 9). Unlock the doors from the driver's door control panel.
- 10
Open the driver's door. This completes the exit from the programming mode.
Source...