How to Upgrade the RAM for a Fujitsu T4210
- 1). Power off your Fujitus T4210 and unplug the power cable.
- 2). Close the LCD screen and turn the unit upside down.
- 3). Slide the battery out of its compartment on the bottom of the computer. Locate the compartment cover with a single screw on the bottom of the laptop. This is the memory compartment.
- 4). Remove the screw and remove the compartment cover to expose the green memory module inside.
- 5). Pull the clips at the ends of the module out and the module will spring up. Remove it from the compartment.
- 6). Fit a new DDR2 module in the old one's place and press it gently down until it locks in place.
- 7). Replace the compartment cover and the screw.
Source...