Get the latest news, exclusives, sport, celebrities, showbiz, politics, business and lifestyle from The VeryTime,Stay informed and read the latest news today from The VeryTime, the definitive source.

How to Remove an Instrument Cluster on a 1966 Corvette

31
    • 1). Open the hood of your Corvette and disconnect both battery cables. This can be done with a ratchet or a wrench.

    • 2). Open your glove compartment and remove the screws holding the glove compartment in place.

    • 3). Pull the glove compartment out of the dash and set it aside.

    • 4). Remove the lower air distribution ducts from the area revealed by the removal of the glove compartment. They should pull out.

    • 5). Pull off the console's side panels.

    • 6). Take out the screws holding the console to the instrument panel. They will be along the front of the console.

    • 7). Pull off the radio knobs, washers, bezels and nuts. They will come off by hand.

    • 8). Unplug the antenna lead-in, the electrical harness and the speaker connectors from the back of the radio.

    • 9). Remove the attaching bolt on the lower right side of the radio with a box wrench or a ratchet and socket.

    • 10

      Turn the radio to the left and pull it out of the left side of the console.

    • 11

      Disengage the retaining clips on the instrument panel bracket by pulling downward on them.

    • 12

      Pull the center instrument cluster out far enough to access the wires on the back side of it.

    • 13

      Disengage the electrical connector from the back of the cluster. It should pull out.

    • 14

      Pull off the steering column cover.

    • 15

      Take off the nuts holding the steering column to the dash bracket. They'll be along the top and may be removed with a box wrench or a ratchet and socket.

    • 16

      Take out the screws holding the lens to the bezel along the top and bottom of the cluster.

    • 17

      Slide the lens out of the bezel and set it aside.

    • 18

      Take out the screws holding the instrument panel to the cluster. They should be clearly visible along the side of the cluster.

    • 19

      Pull the instrument cluster toward you, put not all the way out. You must pull it forward just enough to access the cables on the back.

    • 20

      Unplug the wires on the back of the cluster. They should come out when pulled by hand.

    • 21

      Remove the instrument cluster from you Corvette.

Source...
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time

Leave A Reply

Your email address will not be published.