Check shirt sweater clothing matters needing attention
See: bottom clamping clip can not be Gu Qi, clamping not be snakes, two clamping should be symmetrical, clip top isn't peck, sandwiched bottom not seam height spent, must be balanced; suture clip do not have edge phenomenon, coarse needle or needle paragraph three Siping, thick sweater clip bottom to pick plum clip (cross).
One, the style according to customer order requirements: approval of the sealed sample controlled goods style.
Two, to handle: wash water to (according to the guests of the OK group do or piece of cloth requirements) does not have peculiar smell.
In three, to mark (all types of non-standard): marks to car median, with no height and not straight, form a ladder, car mark Chu Road to average and not be beads, rejection of mark, mark line to color, main mark, mark ingredient content and method to correct reference ingredients, notice, mark line shear net.
In four, the chest card: card color number is correct and the main mark code number is consistent, Xiongpai location is correct.
Five, on the foot mark: number location and vehicle method is correct, may not have feet mark off.
Six, look at the sweater:
(1): neck collar shape to round, do not have high collar and angle, can not be ear ring collar, collar can not be pressed on mirror surface and pressure too died tracking collar on both sides, not with a concave, after the collar can not be wrinkled, seam collar sliver to be uniform.
(2): V V collar collar shape to V straight, both sides brought cannot have big fine edges and length, not into heart, collar Tsui can skew, collar stop can not be too thick Gu Qi, collar not be mirror and pressure too died tracking, mirror.
(3) bottles (high, softball) lead: the collar shape to round, no distortion, collar must be straight not wave, collar top seam can not have concave phenomenon, bring inside end to side not to harvest.
(4): pick took lead in take-up is loose, skipping, end of the line is closed, the collar shape to round.
(5): thoracotomy chest paste to be straight with no length, chest to not be snakes and they affixed; foot not be pecked into pointed, buttons to the median, the button face mask to cover the bottom post about 2-5mm (according to the needle and chest width), button spacing to consistent, button line and lock liner is paired body color, button line can not have loose, button whether the door is blank and rotten, buttons have powder printing, the button can not be too tight.
Seven, see buck shape: both shoulder position cannot have big fine buck, Buck spent a not weaving fault, Buck tail whether or not to loose need to reinforce the needle etc..
Eight, look at the sleeve: sleeve top cannot have the skew and can not be pressed too died the mark, can not have aircraft cuff and sleeve torsion bone, bone not be snakes and ironing out big thin edge, cuff bottom bone on both sides should be symmetrical, the cuff is to be straight with no horn, (color shirt color to strip), sticky edges, torsional bone.
Nine, see: bottom clamping clip can not have Gu Qi, clamping not be snakes, two clamping should be symmetrical, clip top isn't peck, sandwiched bottom not seam height spent, must be balanced; suture clip do not have edge phenomenon, coarse or fine needle, needle of the three, Siping thick sweater clip bottom to pick plum clip (cross).
Ten, body bone: body bone position can not be stitched up the snake and sticky edges, small side, twisting bone, cramps (color sweater stripes to symmetry cannot weave multi turn less phenomenon).
Eleven, cuff, cuff feet: flat with no wave, both not be pecked and fly, hem cuff