How to Change an MDX Cabin Filter
- 1). Open the glove box.
- 2). Lift the stop bar away from the hook on the right side of the open glove box.
- 3). Press the sides of the glove box in toward the middle to unhook the top of the glove box from the dash.
- 4). Pivot the glove box down so it hangs toward the floor of the MDX.
- 5). Pull the filter frame assembly straight out of the dash to remove it.
- 6). Remove the old filter from the filter frame.
- 7). Insert the new cabin filter in the frame. Position the filter so the tabs on the edges of the filter cover the filter material.
- 8). Slide the filter frame assembly into the compartment.
- 9). Lift the glove box up and back into the dash. Hook the stop bar back into position on the right side of the glove box.
Source...