The Coats 5065ex Rim Clamp Tire Changer Review
The Coats 5065EX rim clamp tire changer has been one of Coats best selling machines because of the fact they put and pack so many features into this machine for such an affordable price. This tire changer has a manual swing arm design that uses one control to adjust the horizontal tool head position and it has a second control that is meant to adjust the vertical height. This tire changer has a 1.5 hp air drive system that gives the tire technician fast and powerful control of the wheel under heavy loads while at the same time allowing the technician to have complete and total control of the movement of the wheel.
The Coats 5065EX tire changer has a bead loosener that features three support blocks that are meant for to provide greater control of the wheel. It has precise and accurate internal or external clamping that ensures for proper placement of the wheel on the tire changers table top. The Coats 5065EX tire changer has a external rim diameter of 6 inches to 22 inches and it has a internal rim diameter of 8 inches to 24 inches. The width of rim is at maximum 14 inches and the diameter of the tire itself is at the most 50 inches.
Its drive system is both air and electric. Its air source for the air system is 110 to 175 PSI, it is 5 HP compressor, and it has 14 to 15 SCFM at 150 PSI. Its air source for the electric system is 110 to 175 PSI, 5 HP compressor, and it has 5 SCFM at 150 PSI. The storage is on the tower and on the chassis, and its bead loosening is pedal actuated. The chassis footprint for the Coats 5065EX rim clamp tire changer is 35 inches wide, 44 inches deep, and it is 75 inches high. The weight of this tire changer is approximately 585 pounds. Here are just some specific details about this rim clamp tire changer and what it comes with
Exclusive pedal-actuated X-shaped tabletop provides support for the most delicate wheels
Handles broad range of wheels and tires, from 6" to 26" in diameter and rims up to 14" wide
One-control manual swing arm adjusts horizontal tool head position while
easy second control adjusts vertical height
1.5 HP air drive system provides plenty of power plus infinite wheel control.
The Coats 5065EX tire changer has a bead loosener that features three support blocks that are meant for to provide greater control of the wheel. It has precise and accurate internal or external clamping that ensures for proper placement of the wheel on the tire changers table top. The Coats 5065EX tire changer has a external rim diameter of 6 inches to 22 inches and it has a internal rim diameter of 8 inches to 24 inches. The width of rim is at maximum 14 inches and the diameter of the tire itself is at the most 50 inches.
Its drive system is both air and electric. Its air source for the air system is 110 to 175 PSI, it is 5 HP compressor, and it has 14 to 15 SCFM at 150 PSI. Its air source for the electric system is 110 to 175 PSI, 5 HP compressor, and it has 5 SCFM at 150 PSI. The storage is on the tower and on the chassis, and its bead loosening is pedal actuated. The chassis footprint for the Coats 5065EX rim clamp tire changer is 35 inches wide, 44 inches deep, and it is 75 inches high. The weight of this tire changer is approximately 585 pounds. Here are just some specific details about this rim clamp tire changer and what it comes with
Exclusive pedal-actuated X-shaped tabletop provides support for the most delicate wheels
Handles broad range of wheels and tires, from 6" to 26" in diameter and rims up to 14" wide
One-control manual swing arm adjusts horizontal tool head position while
easy second control adjusts vertical height
1.5 HP air drive system provides plenty of power plus infinite wheel control.
Source...