How to Disconnect a Wire Harness Connector
- 1). Pry the two tangs on the sensor out with your fingers. Pull the plug out of the sensor. If you cannot pry both tangs open with one hand, use the screwdriver to "help" one of the tangs pull away from the sensor.
- 2). Slide the screwdriver between the tang and the sensor. Use your fingers to pull the other tang away from the sensor and pull the plug.
- 3). Unbolt the retaining bolt in the center of the computer's wiring harness, using the appropriate socket. Pry the tangs on each side of the plug away from the plug, if the computer wiring harness is equipped with both, or just the tangs. Pull the plug straight out of the computer, taking care not to bend the pins in the plug.
Source...