How do I Layer Crown Moulding for Victorian Effect?
- 1). Choose a type of crown molding. Crown molding comes in various shapes and sizes. For maximum layered effect, choose a crown molding that is at least four inches wide.
- 2). Choose a baseboard molding that is at least three inches. When choosing a decorative edge for the baseboard molding, try to find something that matches the design of the crown molding. The baseboard molding will be flipped upside down during installation. The decorative edge of the baseboard will create the bottom edge of the crown molding once installed.
- 3). Mark a line on the wall to guide you as you install the baseboard molding. If the crown molding is four inches wide, the line should be placed three-and-a-half inches from the ceiling.
- 4). Measure the wall and cut the baseboard molding to size with a miter saw. Install the baseboard molding upside down, directly under the line. The decorative edge of the molding should face downwards. Nail it into place with a nail gun.
- 5). Measure the crown molding and cut it to size with a miter saw. Install the crown molding on the wall. Place the bottom edge of the crown molding on the face of the installed baseboard molding. The crown molding should overlap the baseboard molding by approximately a half-inch. The top of the crown molding should touch the ceiling. Nail the crown molding into place with a nail gun.
- 6). Fill the holes in the moldings with wood putty. Allow the putty to dry per the manufacturer directions.
- 7). Paint the baseboard and crown moldings the same color. Once they are painted, the two molding will look like one large molding.
Source...