How to Replace a Side View Aztek Mirror
- 1). Shut off the engine and place the Aztek's transmission in park. Engage the emergency brake.
- 2). Pop off the plastic shield that covers the mirror retaining bolts on the inside corner of the door.
- 3). Disconnect the mirror's electrical connector. Remove the three steel retaining nuts using the 3/8-inch ratchet and a metric socket.
- 4). Remove the side view mirror from the door. Line up the studs on the new side view mirror with the mounting holes in the door. Insert the mirror's studs into the holes and install one steel nut to hold the mirror in place.
- 5). Reverse Steps 2 to 3 to complete the procedure. Installation is reverse of removal.
Source...