How to Remove the Tape From an Ultrium 448
- 1). Check the 448's "Ready" LED light to ensure that it's solid and not flashing. Power on the 448 if "Ready" light isn't on by pressing the "Power" button on the tape drive's front left side.
- 2). Press the gray "Eject" button on the front of the 448. The "Ready" light will flash as the tape drive preps the tape for ejection. The 448 will eject the tape after it is fully rewound.
- 3). Remove the tape from the tape slot and the switch off the 448's power.
Source...