How to Wire a Two-Way Radio in a Yukon
- 1). Open the Yukon's hood and use a socket wrench to remove the battery's negative terminal.
- 2). Remove the four screws from the central dash surrounding the radio using a Phillips screwdriver.
- 3). Pry the central dash off the radio using a flat-head screwdriver. Pull the radio out and disconnect its wiring connector. Remove it from the vehicle.
- 4). Place the two-way radio into the dashboard and connect the wiring connector to the radio.
- 5). Reattach the central dash and its screws. Reconnect the battery and close the hood.
Source...