How to Remove the Pulley From a Driveshaft of a Briggs & Stratton
- 1). Tighten the pipe wrench onto the driveshaft of the Briggs & Stratton engine from which you need to remove the pulley.
- 2). Fit the proper wrench on the bolt holding the pulley onto the base of the driveshaft.
- 3). Hold the pipe wrench firmly with your non-dominant hand.
- 4). Rotate the bolt with your dominant hand on the base of the pulley counterclockwise until you completely remove the bolt.
- 5). Pull off the pulley with your hand.
Source...